PSI Wheel

Level - Beginner

PSI Wheel. You can buy a PSI Wheel at most any metaphysical store for less than $10. But you probably have everything you need to be able to make a PSI wheel laying around your house right now.

All it takes to make your own PSI wheel is a small square of aluminum foil, a regular sewing needle and something to hold the needle in an upright position. A small lump of clay works great for this. I prefer to also have a clear glass or a jar to put over the wheel when I use it.

To make the PSI Wheel, cut your foil into a square. One about 2 inches square is a good size, but a little smaller or larger will still work most of the time.

Fold the square of foil in half to form a triangle. Lay the foil on the table with the fold edge toward you. Take one corner with the folded edge and fold it over to meet the other corner with a folder edge. You should now have a smaller triangle. Crease all the edges so there is a definite fold in the foil.

Open the foil back up but do NOT fold it out flat. Leave it with a point in the middle sticking up and the 4 corners even around the lower edge.

Stick your needle, point side up in the clay (or whatever you are using), then balance the center point of the foil on the needle like a hat for the needle.

Place your PSI wheel in a place where you can see it while sitting at a comfortable dictance from the PSI wheel. Place your clear glass or jar over the PSI wheel so no stray wind can cause it to move and you are ready to start working it!

Use your mind power to turn the foil (wheel) around on the pin. In the early stages, it really doesn't matter which way it turns. Try to turn it one way for a while and if that doesn't work for you then try to turn it the other way. As with all of the exercises, try to become one with the item. Visualize your minds energy down to the cellular level and see it mesh with the cells of the foil wheel and make it turn.